Pancake Winders
Simple operation Machine controls allow you to switch between manual and automatic operation, to change spindle direction and to switch between payout and take-up operation. If you have additional control requests, we typically add them as machine options. Speed and tension controls that meet your process requirements JCR offers several Speed and Tension control options for you to choose from. Our standard design is a product dancer with adjustable tension slide weight. The dancer automatically adjusts the spindle speed to match the speed of your process. We also offer Non-contact (touchless) loop control systems, like ultrasonic sensors, part/length count, capacitive sensors, or a speed input signal from your process. Paper interleaf capability For products with a layer of paper interleaf, we will add a paper spindle with its own speed and tension controls.
WM100
Single Spindle Take-up and Payout system. Up to 48" reel diameter with dancer loop and tension control.
WM121
Dual Pay-out/Take-up with upper/lower variable speed spindle drives, Motorized paper take-up spindle with dancer speed control.
WM320
Two Spindle Automatic Take-up System. Up to 36" reel diameter. Sample strip cut with two reel capacity.
WM324
Four spindle automatic take-up system with paper interleaf. Up to 36" reel diameter. Sample strip cut with four reel capacity.
WM324P
Automatic cut and transfer overwind operation with non-contact loop control. It also has four reel capacity and programmable paper tension.
WM3202
Two spindle automatic take-up system. Two reel capacity. Up to 36" reel diameter with 18" paper diameter.
WM3204
Four spindle automatic take-up system. Four reel capacity with paper interleaf. Up to 30" reel diameter with 24" paper diameter.
WM3206
Six spindle automatic take-up system. Six reel capacity with paper interleaf. Up to 30" in diameter with 24" paper diameter.
WM3208
Eight spindle automatic take-up system. Eight reel capacity with paper interleaf. Up to 30" reel diameter with 24" paper diameter.
WM3210
Ten spindle automatic take-up system. Ten reel capacity with paper interleaf. Up to 30" reel diameter with 24" paper diameter.
Turret Style
Time-tested designs Indexing take-ups operate with all spindles in the same vertical or horizontal index plane. When a reel is full, the machine indexes, and an empty reel moves into the fill position. Available in 3, 4, and 8 reel versions, these machines feature automatic reel transfer and various styles of product feeding. Options available include paper interleaf, overwind / underwind operation, and sample strip cut. Easy access for paper and product reel changes Our paper and product spindles are positioned for easy use by the operator. Our indexing models include easy access to all spindles from the front or side.
WM300
Automatic take-up system. Up to 32" reel diameter with three reel capacity. Dancer loop and tension control. Optional 4th spindle.
WM300-2
Automatic take-up system. Dual strip, eight reel compacity. Programmable operator interface with an 800 IPM feed rate.
WM310
Automatic take-up system. Up to 24" reel diameter with sample strip cut and four reel capacity. Motorized tangential feeder.
Heavy Duty
Heavy Duty Payout and Take-up Equipment is typically used when processing wide metal coils of 1,000 to 10,000 lbs. Coilmaster take-ups feature collapsible mandrel coil retention, programmable tension control, and an edge sensor/controller for precision alignment of your product. The standard design accommodates product widths up to 16", but as with all JCR products, custom designs are available.
CM6000
Stock take-up system. 6000 pound weight capacity with 48" coil diameter capacity. 16" material width with optional Edge Control system.
CM9000
Stock take-up system. 9000 pound weight capacity with 65" coil diameter capacity. 16" material width.
WM320HD
Heavy duty two spindle automatic take-up system and automatic reel transfer with programmable tensioning.